Our industrial cutter range is specially designed for a wide range of testing industrial applications. The ICU 20 S 30 cutter has general standard blades. Therefore this cutter is very much suitable in applications like: Car recycling: Catalytic converters, exhaust pipes, doors, A- and B-posts, drive shafts (hollow), engine mountings, steering columns, bumpers, bull bars and pressed steel wishbones. Demolition: Rod material, tube profiles, frames, construction materials, wood, roots (trees), fuel pipes, heating pipes, small cables. Foundry: Removing risers and feeders from aluminium castings.
Details | ||
Articlenumber | 170.012.059 | |
Basic specifications | ||
model | ICU 20 S 30 | |
max. working pressure | 500 / 50 (bar/Mpa) | 7252 psi |
blade type | 30 standard | |
cutter type | stationary | |
Performance | ||
max. cutting force | 246 kN / 25.1 t / 246 / 25.1 (kN/t) | 55303 lbf |
max. cutting opening | 158 mm | 6.2 in |
General specifications | ||
required oil content (effective) | 84 cc | 2.8 oz |
Dimensions, weight and temperature | ||
weight, ready for use | 26.6 kg | 58.6 lb |
temperature range | -20 +80 °C | -4 +176 °F |
Technical drawing dimensions | ||
dimension A | 651 mm | 25.6 in |
dimension B | 361 mm | 14.2 in |
dimension C | 312 mm | 12.3 in |
Cutting performance | ||
max. cutting diameter round bar (S235 acc. to EN 10025-2) | 24 mm | |
max. cutting diameter round bar (S235 acc. to EN 10025-2) | 0.9 in | |
max. cutting diameter round tube (E235 acc. to EN 10305-1), based on wall thickness 2mm/0,08in | 100 mm | |
max. cutting diameter round tube (E235 acc. to EN 10305-1), based on wall thickness 2mm/0,08in | 3.9 in | |
catalytic converter | 95 % | |
number of cuts per day | 200 | |
number of operating hours per day | 24 |