Hydraulic Cylinders

Holmatro Multi-Purpose (General) Cylinders (HGC) – spring return

With a lifting capacity of 5 up to 100 tons and a stroke length between 50 and 250 mm, the Multi (general) Purpose cylinder range is suitable for the most varied applications. The cylinders are fitted with base mounting holes and collar thread. There is internal plunger thread on all models to 50 tons.

Holmatro Flat Cylinders (HFC) – spring return

Cylinders with a very low construction height and a lifting capacity of 5 up to 100 tons. Especially developed in case of limited insertion space.

Holmatro Short stroke Cylinders (HSC) – spring return

Cylinders with a short stroke, a low construction height and a lifting capacity of 10 up to 100 tons. Very suitable for general lifting activities.

Holmatro Aluminum Cylinders (HAC) – spring & hydraulic return

The aluminum cylinders combine the best of two worlds; they are over 50% lighter, but just as robust as their steel equivalents. With a lifting capacity of 20 up to 150 tons and a stroke length between 50 and 150 mm the cylinder range is very suitable for lifting activities requiring frequently moving the cylinder, making a low weight essential.

Holmatro Aluminum Hollow plunger Cylinders (HAHC) – spring & hydraulic return

Aluminum cylinders with a hollow plunger for both pushing and pulling, with a capacity of 20 up to 150 tons and a stroke length between 50 and 250 mm. Especially developed for pulling using pulling rods.

Holmatro Hollow plunger Cylinders (Jacks) (HHJ)- gravity, spring & hydraulic return

Cylinders with a hollow plunger for both pushing and pulling, with a capacity of 5 up to 110 tons and a stroke length varying between 25 and 150 mm. Especially developed for pulling using pulling rods.

Holmatro High tonnage Cylinders (Jacks) – (HJ) gravity & hydraulic return (HJ)

Cylinders with a lifting capacity of 50 up to 300 tons and a stroke length between 50 and 300 mm. Very suitable for heavy lifting activities.

Holmatro Locknut Cylinders – (HLC) gravity & hydraulic return

Cylinders with mechanical load locking, a lifting capacity of 50 up to 250 tons and a stroke length between 50 and 300 mm. Because of the smart return-plunger, the hydraulic return locknut cylinders are hardly higher than the gravity return locknut cylinders. All suitable for sustained load by means of of mechanical load locking.

Holmatro Telescopic Cylinders (HFJ) – gravity return

Cylinders with a very low construction height, two different capacities and stroke lengths in one cylinder. Very suitable for various lifting activities.

Holmatro Pulling Cylinders (Jacks) (HPJ) – spring return

Cylinders with a pulling capacity of 11 up to 60 tons and a stroke length of 150 mm. Especially developed for, among other things, pulling heavy objects towards each other or levelling.