Combi Tool PCT14ST
Cordless Combi Tool, part of the Holmatro Pentheon Series. Designed to offer you unrivaled performance, superior usability, advanced connectivity and exceptional serviceability. This multifunctional tool can be used for cutting, spreading and squeezing and is therefore suitable for a variety of applications, ranging from forcible entry to extrication of persons trapped.
Insights at your fingertips
Get the MyHolmatro App now!
Next-Gen
- Specyfikacje
-
Szczegóły Numer produktu 151.002.418 Podstawowe dane model PCT14ST maks. ciśnienie robocze 720 / 72 (bar/Mpa) 10443 psi bateria w zestawie no Dane użytkowe maks. siła rozpierania 1350 / 137.7 (kN/t) 303492 lbf min siła rozpierania (EN 13204) 33 / 3.4 (kN/t) 7419 lbf maksymalne rozwarcie ostrzy 362 mm 14.3 in maks. rozwarcie ostrzy 277 mm 10.9 in maks. wyciskanie siły 34 / 3.5 (kN/t) 7644 lbf stopień ochrony IP57 wytyczne 2006/42/EC, 2014/30/EU, 2014/53/EU maks. sila 268 / 27.3 (kN/t) 60249 lbf Wymiary, waga i temperatura waga urządzenia 14.1 kg 31.1 lb ciężar bez akumulatora 12.6 kg 27.8 lb wymiar (AxBxC) 731 x 270 x 275 mm 28.8 x 10.6 x 10.8 in Normy EN 13204 klasyfikacja BK33/362E-14.1 NFPA 1936, wydajność cięcia A5 B5 C5 D6 E4 F3 NFPA 1936 zgodny yes EN 13204, wydajność cięcia 1E 2E 3E 4E 5E EN 13204 zgodny yes maks. siła rozpierania (NFPA 1936, HSF) 40 / 4.1 (kN/t) 8992 lbf min. siła rozpierania (NFPA 1936, LSF) 30 / 3.1 (kN/t) 6744 lbf Wydajność cięcia runda bar (S235 wg. EN 13204) 24 mm 0.9 in - Właściwości
-
- • Unparalleled speed for faster ST operations
- Fastest combi tool on the market thanks to Stepless Speed Maximization (patented) – The tool continuously optimizes its motor and pump settings, giving you maximum speed at any tool load
- Maximum operating flexibility with two operation modes – Reduced speed training/demo mode and high speed Pentheon mode - • Ultimate speed control for more controlled tool handling
- Two-speed inline control handle – Switch between high-speed and low-speed and keep perfect control at all times - • Guaranteed maximum power during a tool’s entire lifespan
- Electronic motor control and pressure monitoring – Constant lifetime performance for every Pentheon tool - • Minimum sound level for maximum stealth properties
- Automatic engine start and stop – If the tool is switched on, the engine will start when you turn the control handle, and stops when you release the handle - • Battery management made easy
- Charge batteries directly on the tools with the On-Tool Charging System
- Priority charging for on-tool batteries over batteries on a separate charger
- Charge up to six batteries automatically – Connect up to three chargers to one single outlet
- Holmatro battery – Power Pentheon tools as well as OmniLock struts (patented) and other upcoming Holmatro products - • Superb ergonomics for effortless handling
- Easy tool operation – Inline control handle with 360° access
- Hold every tool in any position – 360° carrying handle made of tough, damage-proof material - • Continue your mission under all conditions
- Flawless performance under water, at high and low outdoor temperatures and in rain and snow
- Easier communication during ST operations – A new and improved drive system ensures tool operation at a lower sound level
- Automatic LED lights in the carrying handle, powered by the main battery. The lights can also be operated manually - • Realtime tool insights to adapt and change tactics
- Connect every tool to your tablet or phone with Bluetooth®
- Easy to use and intuitive MyHolmatro app
- Real-time diagnostics during every operation – Monitor battery state of health and state of charge, pump stage, motor temperature, working pressure (including peak pressure) and speed mode - • Automatically keep your tools in perfect condition
- Quickly and easily perform an automated Pentheon Self Check with the MyHolmatro app – Automatically check the drive system, speed and pressure, battery firmware and battery state of health - • Effortless tool maintenance
- Premium tool service thanks to the Holmatro Inspection Procedures (HIP) – An extensive software program for Authorized Holmatro (Dealer) Service Technicians
- • Unparalleled speed for faster ST operations
- Powiązane produkty
-
Wymagane akcesoria Akcesoria
- Do pobrania
-
