Motorsport Rescue Set Circuit
Features & benefits
- Selected based on its performance during practical cutting tests on the F1 titanium HALO.
- The 30-degree inclined cutter jaw leaves more working space between the body of the tool and the car / your patient, which is safer.
About the Motorsport Rescue Set Circuit
Specifications
Details
Article number
MRS-CRT
Basic specifications
model
Circuit
max. working pressure
10443 psi
max. working pressure
720 / 72 (bar/Mpa)
Features
Powerful Inclined Cutter
- Selected based on its performance during practical cutting tests on the F1 titanium HALO.
- The 30-degree inclined cutter jaw leaves more working space between the body of the tool and the car / your patient, which is safer.
Spreader with Extreme Grip Spreading Tips for space creation
- The ideal tool to bend, or push away, deformed parts of the race car to create the space required for driver extraction.
- Lots of pointed teeth on the inside and outside of the tips bite into the material for superior grip.
Powerful ram for space creation around the driver in order to remove the entrapment
- With extension pipe to create an even bigger opening.
Smart Ram Extension
- As soon as you connect the optional extension pipe, the ram will detect this and automatically adapt its maximum force to the new length that can be achieved. So you can safely continue your job.
Very compact mini cutter
- Allows you to cut in narrow spaces that are difficult to reach.
Cutter, spreader and ram equipped with innovative Pentheon Technology
- Unparalleled speed thanks to Stepless Speed Maximization. Where all other rescue tools show a significant decrease in speed when switching to another stage to deal with higher loads, Holmatro Pentheon tools stick to the ideal stepless speed curve.
- With two-mode control handle for ultimate control. Choose between the tool’s high-speed and low-speed modes at any time during the rescue operation.
- Battery management made easy with On-Tool Charging. Leave the battery on the tool, connect the tool to the charger and the whole charging process will regulate itself. The battery on the tool had priority over the one on the charger, which will resume charging when the battery on the tool is 100% full.