Combi Tool PCT17ST
| min. spreading force (EN 13204): | 6295 lbf |
| min. spreading force (EN 13204): | 28 / 2.9 (kN/t) |
| weight, ready for use (incl. battery): | 14.4 kg |
| weight, ready for use (incl. battery): | 31.7 lb |
Features & benefits
- Fastest combi tool on the market thanks to Stepless Speed Maximization (patented) – The tool continuously optimizes its motor and pump settings, giving you maximum speed at any tool load
- Maximum operating flexibility with two operation modes – Reduced speed training/demo mode and high speed Pentheon mode
About the Combi Tool PCT17ST
Specifications
Details
Article number
151.002.419
Basic specifications
model
PCT17ST
max. working pressure
10443 psi
max. working pressure
720 / 72 (bar/Mpa)
battery included
no
connectivity, mobile app
Bluetooth
Performance
max. spreading force
303492 lbf
min. spreading force (EN 13204)
6295 lbf
spreading distance
431 mm
spreading distance
17 in
max. cutting opening
352 mm
max. cutting opening
13.9 in
max. squeezing force
6070 lbf
retracted length
1000 cycles of spreading and pulling while the tool is loaded and 1000 cycles of biting in material that cannot be cut in
max. spreading force
1350 / 137.7 (kN/t)
min. spreading force (EN 13204)
28 / 2.9 (kN/t)
max. squeezing force
27 / 2.8 (kN/t)
protection rate
IP57
directives
2006/42/EC, 2014/30/EU, 2014/53/EU
theoretical cutting force
60249 lbf
theoretical cutting force
268 / 27.3 (kN/t)
min. squeezing force (EN 13204 2025 Ed.)
3057 lbf
min. squeezing force (EN 13204 2025 Ed.)
13.6 / 1.4 (kN/t)
Dimensions, weight and temperature
weight (excl. battery)
12.8 kg
weight (excl. battery)
28.2 lb
dimensions (AxBxC)
776 x 270 x 275 mm
dimensions (AxBxC)
30.6 x 10.6 x 10.8 in
weight, ready for use (incl. battery)
14.4 kg
weight, ready for use (incl. battery)
31.7 lb
Norms
EN 13204 classification
BK28/431E-14.4
NFPA 1960, cutting capacity
A5 B5 C4 D6 E4 F3
NFPA 1960 compliant
yes
EN 13204 cutting capacity
1E 2E 3E 4E 5E
EN 13204 compliant
yes
NFPA 1960, HPF
6070 lbf
NFPA 1960, HPF
27 / 2.8 (kN/t)
NFPA 1960, HSF
7194 lbf
NFPA 1960, HSF
32 / 3.3 (kN/t)
NFPA 1960, LPF
4047 lbf
NFPA 1960, LPF
18 / 1.8 (kN/t)
NFPA 1960, LSF
5620 lbf
NFPA 1960, LSF
25 / 2.5 (kN/t)
EN 13204 2025 Ed classification
F-CT2-28/431-E
AMCA 240-22 certified
6000 cycles
Cutting performance
round bar (S235 acc. to EN 13204)
24 mm
round bar (S235 acc. to EN 13204)
0.9 in
Features
Unparalleled speed for faster ST operations
- Fastest combi tool on the market thanks to Stepless Speed Maximization (patented) – The tool continuously optimizes its motor and pump settings, giving you maximum speed at any tool load
- Maximum operating flexibility with two operation modes – Reduced speed training/demo mode and high speed Pentheon mode
Ultimate speed control for more controlled tool handling
- Two-speed inline control handle – Switch between high-speed and low-speed and keep perfect control at all times
Guaranteed maximum power during a tool’s entire lifespan
- Electronic motor control and pressure monitoring – Constant lifetime performance for every Pentheon tool
Minimum sound level for maximum stealth properties
- Automatic engine start and stop – If the tool is switched on, the engine will start when you turn the control handle, and stops when you release the handle
Battery management made easy
- Charge batteries directly on the tools with the On-Tool Charging System
- Priority charging for on-tool batteries over batteries on a separate charger
- Charge up to six batteries automatically – Connect up to three chargers to one single outlet
- Holmatro battery – Power Pentheon tools as well as OmniLock struts (patented) and other upcoming Holmatro products
Superb ergonomics for effortless handling
- Easy tool operation – Inline control handle with 360° access
- Hold every tool in any position – 360° carrying handle made of tough, damage-proof material
Continue your mission under all conditions
- Flawless performance under water, at high and low outdoor temperatures and in rain and snow
- Easier communication during ST operations – A new and improved drive system ensures tool operation at a lower sound level
- Automatic LED lights in the carrying handle, powered by the main battery. The lights can also be operated manually
Realtime tool insights to adapt and change tactics
- Connect every tool to your tablet or phone with Bluetooth®
- Easy to use and intuitive MyHolmatro app
- Real-time diagnostics during every operation – Monitor battery state of health and state of charge, pump stage, motor temperature, working pressure (including peak pressure) and speed mode
Automatically keep your tools in perfect condition
- Quickly and easily perform an automated Pentheon Self Check with the MyHolmatro app – Automatically check the drive system, speed and pressure, battery firmware and battery state of health
Effortless tool maintenance
- Premium tool service thanks to the Holmatro Inspection Procedures (HIP) – An extensive software program for Authorized Holmatro (Dealer) Service Technicians
