Offshore wind

Offshore wind

Since the development of Holmatro's first TP levelling set for the construction of the Belgian offshore wind farm Belwind in 2009, the product range for offshore wind applications has significantly expanded. Besides hydraulic solutions to level wind turbine foundations (TP levelling), we have proven ourselves in the field of TP fixation, jacket fixation, cutting applications, seafastening systems and skidding solutions. Holmatro tools are also used for the lifting, weighing and levelling of offshore platforms and are integrated on pipe-laying vessels to support heavy lifting and moving applications.

On this page you will find a selection of our customer projects in offshore wind. Allow us to inspire you and challenge us to come up with a solution for your specific problem. Click on the following projects and read more.

Offshore wind
TP levelling

TP levelling

Levelling wind turbines in which the turbine foundations come in two parts: a monopile (MP) and a transition piece (TP). Commissioned by Smulders Group, Holmatro supplied a TP levelling system for the Dudgeon offshore wind farm.

TP levelling
TP fixation

TP fixation

Precision vertical positioning of a transition piece (TP) on a monopile (MP). Commissioned by Van Oord, Holmatro supplied a TP fixation system for the Burbo Bank Extension offshore wind farm.

TP fixation
TP seafastening & MP skidding and upending

TP seafastening & MP skidding and upending

Transportation of 4 monopiles per time and reduce handling by skidding these MP’s in position for upending. Commissioned by GeoSea, Holmatro supplied smart seafastening, skidding and upending solutions for the installation vessel 'Innovation'.

TP seafastening & MP skidding and upending
Seafastening system for marine transportation

Seafastening system for marine transportation

Transportation by sea of monopiles for offshore wind farms. Commissioned by Conbit Engineering, Holmatro supplied a seafastening system.

Seafastening system for marine transportation
Construction of substation foundations

Construction of substation foundations

For the fixation of the construction of a substation consisting of a foundation and a topside which houses the transformers. Commissioned by Montube Sur – Navantia-Cadiz, Holmatro supplied 150 ton double-acting cylinders and 400 ton pulling cylinders.

Construction of substation foundations