Bending plates and profiles

Bending plates and profiles

Commissioned by: Kersten Europe
Location: Germany

Bending plates and profiles in steel, aluminium and stainless steel. Commissioned by Kersten Europe, Holmatro supplied cylinders with an extreme high side load capacity.


Kersten Europe has been European market leader inbending technology for decades. At production sites in the Netherlands, Germany, Poland and the United Arab Emirates, Kersten sets the standard in bending technology. They bend plates, tubes and sections in steel, stainless steel and aluminium.


Bending plates and profiles

To bend plates and profiles in steel, aluminium and stainless steel, Kersten uses 100 and 200 ton cylinders with a higher side load capacity. The double-acting cylinders are controlled by a special made vari pump, equipped with a remote control that includes a switch for the control of one, two or three cylinders. On request the pumps are also equipped with an adjustable pressure controller, an oil cooler, an adjustable timer to turn of the pump automatically and a bypass switch, so one valve can also control a single-acting cylinder.

Would you like to know more about this project? Contact us via e-mail or call +31 (0)162 751500.

Challenge us!

To come up with a solution for your specific problem also:

Send us a message
Let us call you back