Oil & gas

Oil & gas

On this page you will find a selection of our customer projects in the oil and gas industry. Allow us to inspire you and challenge us to come up with a solution for your specific problem. Click on the following projects and read more.

Oil & gas
Disconnecting couplings from pumps

Disconnecting couplings from pumps

Disconnecting couplings from pumps at locations that offer extremely limited freedom of movement. Commissioned by BP Refinery Rotterdam, Holmatro supplied a ergonomic pulley puller.

Disconnecting couplings from pumps
Roller box lifting

Roller box lifting

Setting up roller boxes on the offshore pipe-laying vessel 'Solitaire'. Commissioned by Allseas, Holmatro supplied 24 ton aluminium pulling cylinders.

Roller box lifting
Topside Lifting System (TLS)

Topside Lifting System (TLS)

During the construction of the world’s biggest lifting ship ‘Pioneering Spirit’ the need arose to provide extra support for the lifting system, in order to be able to safely dismantle, install and transport large drilling platforms. Commissioned by Allseas, Holmatro supplied 280 ton cylinders.

Topside Lifting System (TLS)
Removing locking pins with a 600 mm diameter

Removing locking pins with a 600 mm diameter

Quick-release mechanism for the removal of locking pins with a 600 mm diameter and a length of 1650 mm from hoisting rope shackles. Commissioned by Heerema, Holmatro supplied hydraulic pin retraction systems.

Removing locking pins with a 600 mm diameter
Improving load-cell calibration

Improving load-cell calibration

Calibrating the load-cells faster and much easier at the TLP Snorre A. Commissioned by Statoil, Holmatro supplied 536 ton cylinders.

Improving load-cell calibration
Transport of a piping module

Transport of a piping module

Moving pipe modules at a refinery. Commissioned by Instar, Holmatro supplied a synchonized positioning system combined with a skid system.

Transport of a piping module
Replacement of generator

Replacement of generator

Removing an old generator from the machine hall before the new one could be installed. Commissioned by Feromont, Holmatro supplied a skid system.

Replacement of generator