Push-Pull Unit SPPU-S
The Skidding System push-pull unit - fitted with a cylinder with equal pushing and pulling capacity - pushes or pulls the beam with the load in the correct horizontal position. The push-pull units are fitted with easily dismantled wings that allow the push or pull direction of the system to be changed quickly.
- Specifications
-
Details Articlenumber 100.002.510 Basic specifications model SPPU-S max. working pressure 720 / 72 (bar/Mpa) 10443 psi Performance tonnage 26 t 57320 lb stroke 520 mm 20.5 in capacity (press) 255 kN / 26 t / 255 / 26 (kN/t) 57326 lbf capacity (retract) 267 kN / 27.2 t / 267 / 27.2 (kN/t) 60024 lbf effective pressure area (press) 56.7 cm2 8.8 sq. in. effective pressure area (retract) 37.1 cm2 5.8 sq. in. General specifications required oil content (press) 2950 cc 99.8 oz required oil content (retract) 1929 cc 65.2 oz acting type double return type hydraulic material steel Dimensions, weight and temperature weight, ready for use 114 kg 251.3 lb Technical drawing dimensions dimension A 926 mm 36.5 in dimension B 390 mm 15.4 in dimension C 175 mm 6.9 in - Features
-
- • 400-ton capacity (2 X 200 t)
- • Cylinder with equal capacity for both pushing and pulling
- Ability to push or pull the load into position, instead of only pushing
- Accurate control in both directions - • Demountable wings; push or pull direction can be switched quickly
- • Safe; integrated safety features in the cylinder for protection against overpressure
- Downloads
-
