Ship lifting from dry dock

Ship lifting from dry dock

(Tool deployed : Gravity return cylinders and vari pumps)

Situation

Ship lifting from dry dock

How to lift a special shaped ship from and place it back into a dry dock without damaging it? That is the question our customer was faced with regarding its ferryboats. These ships are massive catamarans, made of aluminium and epoxy. They weigh 3.140 tons, have a length of 110 meters, a width of 40 meters and a draught of 4.5 meters. Our customer developed a special method which involves a hydraulic lifting system designed by Holmatro.

Lifting method with the aid of a hydraulic system

Ship lifting from dry dock

Inside their dry dock the company built 10 concrete towers (height 10 m, ø 2 m), in 2 rows of 5. On top of each tower : a steel carrying frame with a wooden covering mounted on 4 lock nut cylinders: - After the ship is manoeuvred very precisely above the towers, the dock is slowly emptied. - The moment the bottom of the ship - in between both floats - nearly touches the towers, the plungers of all 40 hydraulic cylinders are pushed out. The cylinders are operated from the quay by means of 3 vari pumps. - Dependent the reading of the pressure gauge, each cylinder plunger is pumped out just until the carrying frame touches the bottom of the ship. - The remaining water is pumped out of the dock and the ship is then resting on the cylinders. The load is mechanically locked by means of the lock nuts on the plungers.

Secured and in an empty dock the ship is now ready for major repair work. And after being serviced the ship is launched smoothly back into the water in reverse order.

High Capacity Cylinders - Gravity Return >

Vari Pumps >